2021 China New Design 12v Downlight - Fixed Trim Led Downlight AD10802 – ALUDS

Product Display

Detailed Parts Showing

Trim Mounting Frame

Trimless Mounting Frame

The shading angle of this fixed downlight is 39 degree, while the angle of the severe glare area where the lamp is directly shot to human eyes is 70-90 degree. When people look at the lamp, their eyes will not feel discomfortable by the light emitted by the luminaire.
Fixed downlights shine the light directly downards.Designed to meet the demands of the majority of room types such as lounges, bedrooms……
The trimless frame conceals the downlight for a clean, seamless finish. Designed to be plastered into the ceiling during the early stages of a build, allowing for the downlight to be fitted later.

Complete Wall-washer Downlight Ranges

The same heatsink can be assembled with adjustable or fixed body ring + trim or trimless mounting frame to create different lighting fixtures to meet various applications

Size Lineup

Installation Instruction

1.Cut out the false ceiling with tools, see picture 1.
2.Take off the dark light cone and pull down the light module from the embedded part then the lighting
fixture will be disassembled into three parts.
3.Turn off the power supply before installation, see picture 3.
4/5/6.Put the embedded part into the ceiling hole,fix the lamp fixture to the ceiling by M4 self-tapping
screw to make sure the lamp not loose when installation.
7.Plaster the ceiling and cover the screwhead when lamp fixture installation finished.
8/9.Wiring: Connect the driver output side with the light module and please pay attention to the “+/-”.
10/11.Put the driver into the back side of the false ceiling and make sure it is not covered by anything.
Push the light module into the embedded part until it is fixed then install the dark light cone to the trim
12.Turn on the light and check, installation is accomplished.

Application