Fixed Trim Led Downlight AD10932

Short Description:

● CE CB CCC certified
● 50000 hours lifespan
● 3 years or 5 years warranty
● Dimmable: TRIAC or 0-10V dimming
● High lumen output CITIZEN chip on board, remote driver included
● Beam angle interchangeable, 60 degree flood beam, 36 degree / 24 degree narrow flood beam & 15 degree spot beam included
● Manufactured In: Jiangmen city, Guangdong province, China
● IES File & Lighting Measure Report available


Product Detail

Product Tags

Type 15W fixed trimless led downlight
Model AD10932
Power 6W / 8W / 10W / 12W / 15W
LED CITIZEN
CRI 90
CCT 2700K / 3000K / 4000K / 5000K
Optics LENS
Beam angle 15° / 24° / 36 ° / 60°
Power supply External
Input DC 36V - 150mA / 200mA / 250mA / 300mA / 350mA
Finish White / Black
Cutout φ75mm
Dimension Dia110*H89mm

ad10932

Product Display

Detailed Parts Showing

drawing

Trim Mounting Frame

trim frame

Trimless Mounting Frame

trimless frame

The shading angle of this wallwasher downlight exceeds the direct glare angle of human eyes. When people look at the lamp, their eyes will not feel discomfortable by the light emitted by the luminaire. Best choices for hotels, villas, schools, lounges, museums......
The trimless frame conceals the downlight for a clean, seamless finish. Designed to be plastered into the ceiling during the early stages of a build, allowing for the downlight to be fitted later.

Complete Wall-washer Downlight Ranges

wallwasher

The same heatsink can be assembled with adjustable or fixed body ring + trim or trimless mounting frame to create different lighting fixtures to meet various applications

Size Lineup

size lineup

Installation Instruction

1.Cut out the false ceiling with tools, see picture 1.
2.Take off the dark light cone and pull down the light module from the embedded part then the lighting
fixture will be disassembled into three parts.
3.Turn off the power supply before installation, see picture 3.
4/5/6.Put the embedded part into the ceiling hole,fix the lamp fixture to the ceiling by M4 self-tapping
screw to make sure the lamp not loose when installation.
7.Plaster the ceiling and cover the screwhead when lamp fixture installation finished.
8/9.Wiring: Connect the driver output side with the light module and please pay attention to the "+/-".
10/11.Put the driver into the back side of the false ceiling and make sure it is not covered by anything.
Push the light module into the embedded part until it is fixed then install the dark light cone to the trim
12.Turn on the light and check, installation is accomplished.

installation

installation

installation

Application

img

  • Previous:
  • Next:

  • Write your message here and send it to us